Note: If
the Large File Transfer (the 10th System Check Type status from the top) is FAILED, this
System Check Type cannot be displayed.
Procedure
Figure 1 is an example
of the detail window for the LPARs that are activated (in this example,
an error condition is not shown).
Figure 1. Window: LPARs
activated details
Description: An LPAR does not have a status of running.
Action: Display and repair any open serviceable events that are related to the CEC
enclosures. If there are none, contact your next level of support. The
next level of support must remotely connect to repair this condition.
Next level of support only: The command /opt/hsc/bin/lssyscfg
-r lpar -m <MTMS like 9117-MMA*100096A> -F state,name is
run and checks for each LPAR to have "Running" status.
