MAP1100 Section-52 Static IP Configuration on LPAR

Procedure

  1. Example of the details window contents for the Static IP Configuration on LPAR check:
    ### Verifying the LPARs under SF 2107-986*75ABCD0 are configured with static IPs
    - Verifying LPAR SF75ABCD0ESS11 is configured with static IPs
    LPAR SF75ABCD0ESS11 IP address 172.16.1.111 is properly set to a static IP
    LPAR SF75ABCD0ESS11 IP address 172.17.1.111 is properly set to a static IP
    - Verifying LPAR SF75ABCD0ESS01 is configured with static IPs
    LPAR SF75ABCD0ESS01 IP address 172.16.1.101 is properly set to a static IP
    LPAR SF75ABCD0ESS01 IP address 172.17.1.101 is properly set to a static IP
    ### Passed verification of static IP configuration for SF 2107-986*75ABCD0
  2. Description: Verifies that the LPARs are configured for static IP addresses on both the black and gray networks. This is important for correct communications between LPARs and management console processes. Failure of this check normally indicates an incomplete storage facility installation or IP address range change.
  3. Action: Contact your next level of support.