(D1xxxxxx) Service processor dump status codes, platform dump status codes, and service processor status progress codes
This section describes (D1xxxxxx) service processor dump status codes, platform dump status codes, and service processor status progress codes.
For use by authorized service providers.
(D1xx1xxx and D101C00F) Service processor dump status codes
(D1xx1xxx and D101C00F)
Service processor dump status codes, listed in Table 1,
use the format of D1yy1xxx,
where:
- yy indicates the type of data that is being dumped.
- xxx is a counter that increments each time the server stores 4 KB of data.
When these codes occur during a service processor dump, they appear in the control panel display.
For more information about using progress codes, see Using progress codes.
| Status code | Description/Action | Failing items |
|---|---|---|
| D1001xxx | Dump error data. | FSPSPD1 |
| D1011xxx | Dump sai_header management console file. | FSPSPD1 |
| D101C00F | No power-off to allow debugging of CPU controls. | FSPSPD1 |
| D1021xxx | Dump sai_header directory. | FSPSPD1 |
| D1031xxx | Dump sai_header fips header. | FSPSPD1 |
| D1041xxx | Dump sai_header entry header. | FSPSPD1 |
| D1051xxx | Dump core file for failing component. | FSPSPD1 |
| D1061xxx | Dump all NVRAM. | FSPSPD1 |
| D1071xxx | Dump component trace for failing component. | FSPSPD1 |
| D1081xxx | Dump component data from /opt/p0. | FSPSPD1 |
| D1091xxx | Dump /opt/p1//*. | FSPSPD1 |
| D10A1xxx | Dump safety net trace: SND_LTT_TRACE. | FSPSPD1 |
| D10B1xxx | Dump safety net trace: SND_LTT_PROC. | FSPSPD1 |
| D10C1xxx | Dump safety net trace: SND_PRINTK_BUF. | FSPSPD1 |
| D10D1xxx | Dump safety net trace: SND_PRINTK_IDX. | FSPSPD1 |
| D10E1xxx | Dump safety net trace: SND_INSMOD_BUF. | FSPSPD1 |
| D10F1xxx | Dump safety net trace: SND_LTT_INTR. | FSPSPD1 |
| D1101xxx | Dump safety net trace: SND_FSP_TRACE. | FSPSPD1 |
| D1111xxx | Dump /opt/p0/*. | FSPSPD1 |
| D1121xxx | Dump /opt/p1/*. | FSPSPD1 |
| D1131xxx | Dump all traces. | FSPSPD1 |
| D1141xxx | Dump code version. | FSPSPD1 |
| D1151xxx | Dump all /opt/p3 except rtbl. | FSPSPD1 |
| D1161xxx | Dump pddcustomize -r command. | FSPSPD1 |
| D1171xxx | Dump registry -l command. | FSPSPD1 |
| D1181xxx | Dump all /core/core.* files. | FSPSPD1 |
| D1191xxx | Dump BDMP component trace (after dump, if enough space). | FSPSPD1 |
| D11A1xxx | Dump any state information before dumping starts. | FSPSPD1 |
| D1231xxx | Dump update dump headers. | FSPSPD1 |
| D1241xxx | Dump CRC1 calculation off. | FSPSPD1 |
| D1251xxx | Dump CRC1 calculation on. | FSPSPD1 |
| D1261xxx | Dump CRC2 calculation off. | FSPSPD1 |
| D1271xxx | Dump CRC2 calculation on. | FSPSPD1 |
| D1281xxx | Dump output the calculated CRC1 (sai_headers). | FSPSPD1 |
| D1291xxx | Dump output the calculated CRC2 (data and data headers). | FSPSPD1 |
| D12A1xxx | Jump to the position in dump directly after CRC1. | FSPSPD1 |
| D12B1xxx | Initialize the headers dump time and serial numbers. | FSPSPD1 |
| D12C1xxx | Display final SRC to panel. | FSPSPD1 |
| D12D1xxx | Remove /core/core.app.time.pid. | FSPSPD1 |
| D12E1xxx | Remove /core/core.*. | FSPSPD1 |
| D12F1xxx | Display beginning SRC to panel. | FSPSPD1 |
| D1301xxx | Turn off error log capture into dump. | FSPSPD1 |
| D1311xxx | Turn on error log capture into dump. | FSPSPD1 |
| D1321xxx | Store information about existing core files. | FSPSPD1 |
| D1381xxx | Invalidate the dump. | FSPSPD1 |
| D1391xxx | Check for valid dump sequence. | FSPSPD1 |
| D13A1xxx | Get dump identity sequence. | FSPSPD1 |
| D13B1xxx | Get dump length sequence. | FSPSPD1 |
| D1FF1xxx | Dump complete. | FSPSPD1 |
(D1xx3xxx) Platform dump status codes
(D1xx3xxx)
Platform dump status codes, listed in Table 2,
use the format of D1yy1xxx,
where:
- yy indicates the type of data that is being dumped.
- xxx is a counter that increments each time the server stores 4 KB of data.
When these codes occur during a platform dump, they appear in the control panel display.
For more information about using progress codes, see Using progress codes.
| Status code | Description/Action | Failing items |
|---|---|---|
D1xx3000
- D1xx3FFF |
Platform dump status codes | FSPSPD1 |
(D1xx9xxx - D1xxCxxx) Service processor status progress codes
(D1xx9xxx - D1xxCxxx) Status progress codes, posted by the service processor, offer information about the state of the service processor during a power-off operation. Table 3 lists the service processor status progress codes.
For more information about using progress codes, see Using progress codes.
| Progress code | Description/Action | Failing items |
|---|---|---|
| D1xx900C | Breakpoint set in CPU controls has been hit. | FSPSPD1 |
| D1xxB0FF | Request to initiate power-off program has been sent. | FSPSPD1 |
| D1xxC000 | Indicates a message is ready to send to the server firmware to power off. | FSPSPD1 |
| D1xxC001 | Waiting for the server firmware to acknowledge the delayed power-off notification. | FSPSPD1 |
| D1xxC002 | Waiting for the server firmware to send the power-off message. | FSPSPD1 |
| D1xxC003 | Server firmware handshaking is complete. | FSPSPD1 |