BEDxxxxx
This section lists the BEDxxxxx system reference codes.
If the SRC listed in a serviceable event
is missing from the following table, ask your next level of support
for assistance.
Note: Next level, inform development of any SRCs not
defined in the table.
| System Reference Code | Description |
|---|---|
| BED00000 | Reported Product Data (MRPD) - expected resources were not found. |
| BED00001 | Machine Reported Product Data (MRPD) - detected resource manager (RM) error. |
| BED00002 | Machine Reported Product Data (MRPD) - detected microcode logic error. |
| BED00003 | Machine Reported Product Data (MRPD) - detected subsystem not in expected state. |
| BED00004 | Machine Reported Product Data (MRPD) - detected invalid managed system MTMS. |
| BED00005 | Machine Reported Product Data (MRPD) - detected unknown error. |
| BED00100 | Health check detected possible CEC LPAR memory error. |
| BED00101 | Health check detected possible CEC LPAR processor error. |
| System Reference Code | Description |
|---|---|
| BED10110 | Trailing port status failure has occurred on the power controlling CEC. |
| BED10120 | Trailing port status failure has occurred on the local I/O Enclosure. |
| BED10130 | Trailing port status failure has occurred on the remote CEC. |
| BED10140 | Trailing port status failure has occurred on the remote I/O Enclosure. |
| BED10150 | Invalid trailing port status returned by Phyp code to RAS code. |
| BED10160 | RIO trailing port status failure. |
| BED10210 | Leading port status failure has occurred on the power controlling CEC. |
| BED10220 | Leading port status failure has occurred on the local I/O Enclosure. |
| BED10230 | Leading port status failure has occurred on the remote CEC. |
| BED10240 | Leading port status failure has occurred on the remote I/O Enclosure. |
| BED10250 | Invalid leading port status returned by Phyp code to RAS code. |
| BED10260 | RIO port status failure. |
| BED10310 | Leading port speed failure has occurred on the power controlling CEC. |
| BED10320 | Leading port speed failure has occurred on the local I/O Enclosure. |
| BED10330 | Leading port speed failure has occurred on the remote CEC. |
| BED10340 | Leading port speed failure has occurred on the remote I/O Enclosure |
| BED10350 | Invalid leading port speed returned by Phyp code to RAS code. |
| BED10360 | RIO port speed failure. |
| BED10410 | Power controlling CEC enclosure SPCN MTMS VPD error due to incorrect cabling. |
| BED10411 | Power controlling CEC enclosure read invalid SPCN MTMS VPD. 'UTMP' value found. |
| BED10412 | Power controlling CEC enclosure cannot read SPCN MTMS VPD. 'null' value found. |
| BED10420 | Local I/O enclosure SPCN MTMS VPD error due to incorrect cabling. |
| BED10421 | Local I/O enclosure read invalid SPCN MTMS VPD. |
| BED10422 | Local I/O cannot read SPCN MTMS VPD. |
| BED10430 | Remote CEC enclosure SPCN MTMS VPD error due to incorrect cabling. |
| BED10431 | Remote CEC enclosure read invalid SPCN MTMS VPD. |
| BED10432 | Remote CEC enclosure cannot read SPCN MTMS VPD. |
| BED10440 | Remote I/O enclosure SPCN MTMS VPD error due to incorrect cabling. |
| BED10441 | Remote I/O enclosure read invalid SPCN MTMS VPD. |
| BED10422 | Remote I/O enclosure cannot read SPCN MTMS VPD. |
| BED10450 | Invalid SPCN MTMS VPD returned by Phyp code to RAS code. |
| BED10460 | Incorrect Power Controlling CEC enclosure VPD Found. |
| BED10470 | Incomplete SPCN loop found on CEC XX |
| BED10510 | Leading port type failure has occurred on the power controlling CEC. |
| BED10520 | Leading port type failure has occurred on the local I/O enclosure. |
| BED10530 | Leading port type failure has occurred on the remote CEC. |
| BED10540 | Leading port type failure has occurred on the remote I/O enclosure. |
| BED10550 | Invalid leading port type returned by Phyp code to RAS code. |
| BED10610 | Power controlling CEC enclosure RIO leading port VPD failure due to incorrect cabling. |
| BED10611 | Power controlling CEC enclosure read invalid RIO leading port VPD. UTMP value found. |
| BED10612 | Power controlling CEC enclosure cannot read RIO leading port VPD. |
| BED10620 | Local I/O enclosure RIO leading port VPD failure due to incorrect cabling. |
| BED10621 | Local I/O enclosure read invalid RIO leading port VPD. UTMP value found. |
| BED10622 | Local I/O enclosure cannot read RIO leading port VPD. |
| BED10630 | Remote CEC enclosure RIO leading port VPD failure due to incorrect cabling. |
| BED10631 | Remote CEC enclosure read invalid RIO leading port VPD. UTMP value found. |
| BED10632 | Remote CEC enclosure read invalid RIO leading port VPD. UTMP value found. |
| BED10640 | Remote I/O enclosure RIO leading port VPD failure due to incorrect cabling. |
| BED10650 | Invalid RIO leading port VPD returned by PHYP code to RAS code. |
| BED10660 | Incorrect Leading Port VPD Found. |
| BED10710 | Power controlling CEC enclosure RIO trailing port VPD failure due to incorrect cabling. |
| BED10711 | Power controlling CEC enclosure read invalid RIO trailing port VPD. UTMP value found. |
| BED10712 | Power controlling CEC enclosure cannot read RIO trailing port VPD. |
| BED10720 | Local I/O enclosure RIO trailing port VPD failure due to incorrect cabling. |
| BED10721 | Local I/O enclosure read invalid RIO trailing port VPD. |
| BED10722 | Local I/O enclosure cannot read RIO trailing port VPD. |
| BED10730 | Remote CEC enclosure RIO trailing port VPD failure due to incorrect cabling. |
| BED10731 | Remote CEC enclosure read invalid RIO trailing port VPD. |
| BED10732 | Remote CEC enclosure cannot read RIO trailing port VPD. |
| BED10740 | Remote I/O enclosure RIO trailing port VPD failure due to incorrect cabling. |
| BED10741 | Remote I/O enclosure read invalid RIO trailing port VPD. |
| BED10742 | Remote I/O enclosure cannot read RIO trailing port VPD. |
| BED10750 | Invalid RIO trailing port VPD returned by PHYP code to RAS code. |
| BED10760 | Incorrect Trailing Port VPD Found |
| BED10800 | CEC or I/O enclosure power supply 1 fault. |
| BED10801 | CEC or I/O enclosure power supply 2 fault. |
| BED10802 | CEC enclosure fan 1 fault. |
| BED10803 | CEC enclosure fan 2 fault. |
| BED10804 | Internal error calling rsMMgetPowerFaultStatus. |
| BED10805 | CEC or I/O enclosure power supply 1 not detected. |
| BED10806 | CEC or I/O enclosure power supply 2 not detected. |
| BED10807 | CEC enclosure fan 1 not detected. |
| BED10808 | CEC enclosure fan 2 not detected. |
| BED10810 | Power controlling CEC enclosure read RIO VPD but it is out of order due to incorrect cabling. |
| BED10811 | Power controlling CEC enclosure read invalid RIO VPD. UTMP value found. |
| BED10812 | Unable to read the power controlling CEC RIO VPD. |
| BED10813 | CEC enclosure fan 3 fault. |
| BED10814 | CEC enclosure fan 4 fault. |
| BED10815 | CEC enclosure fan 3 not detected. |
| BED10816 | CEC enclosure fan 4 not detected. |
| BED10817 | CEC enclosure fan 5 fault. |
| BED10818 | CEC enclosure fan 6 fault. |
| BED10820 | Local I/O enclosure read RIO VPD but it is out of order due to incorrect cabling. |
| BED10821 | Local I/O enclosure read invalid RIO VPD. |
| BED10822 | Unable to read local I/O RIO VPD. |
| BED10823 | CEC enclosure fan 5 not detected. |
| BED10824 | CEC enclosure fan 6 not detected. |
| BED10825 | CEC or I/O enclosure power supply 3 fault. |
| BED10826 | CEC or I/O enclosure power supply 4 fault. |
| BED10827 | CEC or I/O enclosure power supply 3 not detected. |
| BED10828 | CEC or I/O enclosure power supply 4 not detected. |
| BED10830 | Remote CEC enclosure read RIO VPD but it is out of order due to incorrect cabling. |
| BED10831 | Remote CEC enclosure read invalid RIO VPD. |
| BED10832 | Unable to read the Remote CEC enclosure RIO VPD. |
| BED10833 | CEC enclosure fan 7 fault. |
| BED10834 | CEC enclosure fan 8 fault. |
| BED10835 | CEC enclosure fan 9 fault. |
| BED10836 | CEC enclosure fan 7 not detected. |
| BED10837 | CEC enclosure fan 8 not detected. |
| BED10838 | CEC enclosure fan 9 not detected. |
| BED10840 | Remote I/O enclosure read RIO VPD but it is out of order due to incorrect cabling. |
| BED10841 | Remote I/O enclosure read invalid RIO VPD. |
| BED10842 | Unable to read the Remote I/O enclosure RIO VPD. |
| BED10850 | Invalid enclosure type returned by PHYP code to RAS code. |
| BED10860 | Incorrect Enclosure VPD Found |
| BED10910 | Tower is not running in MultiHub mode. |
| BED10920 | RIO tower cpssbayXX is missing from RIO Topology on CEC XX. |
| BED10970 | Found failed RIO card on tower. |
| BED10980 | Found failed CEC enclosure RIO card. |
| BED10985 | Found failed I/O Planar on CEC. |
| BED10990 | Found failed CEC. |
| BED13111 | Fan assembly (A1) intake fan error reported by E31 during a status request. |
| BED13112 | Fan assembly (A1) exhaust fan error reported by E31 during a status request. |
| BED13121 | Fan assembly (A2) intake fan error reported by E31 during a status request. |
| BED13122 | Fan assembly (A2) exhaust fan error reported by E31 during a status request. |
| BED13211 | Fan assembly (A1) intake fan error reported by E32 during a status request. |
| BED13212 | Fan assembly (A1) exhaust fan error reported by E32 during a status request. |
| BED13221 | Fan assembly (A2) intake fan error reported by E32 during a status request. |
| BED13222 | Fan assembly (A2) exhaust fan error reported by E32 during a status request. |
| System Reference Code | Description |
|---|---|
| BED20011 | Laptop external cooling Fan 1 reporting one failing impeller. |
| BED20012 | Laptop external cooling Fan 1 reporting two failing impellers. |
| BED20021 | Laptop external cooling Fan 2 reporting one failing impeller. |
| BED20022 | Laptop external cooling Fan 2 reporting two failing impellers. |
| BED20031 | Laptop external cooling Fan 3 reporting one failing impeller. |
| BED20032 | Laptop external cooling Fan 3 reporting two failing impellers. |
| BED20041 | Laptop external cooling Fan 4 reporting one failing impeller. |
| BED20042 | Laptop external cooling Fan 4 reporting two failing impellers. |