SRNs A00-FF0 through A25-001

This section lists the SRNs A00-FF0 through A25-001

The x in the following group of SRNs is encoded as follows:

  8  4  2  1
  |  |  |  |
  |  |  |  Replace all FRUs listed
  |  |  Hot swap supported
  |  Software might be the cause
  Reserved

Note: Some SRNs in this chapter may have 4 rather than 3 digits after the dash (-).

Use the physical location codes and FRU numbers listed on the diagnostics Problem Report Screen. Failing Function Codes (FFCs) are not used in this group of SRNs. For more detailed information refer to MAP 0230: Platform error problem resolution.

Service Request Number	Failing Function Codes	Description/Action
A00-FF0		Description: Error log analysis is unable to determine the error. The error log indicates the following physical FRU locations as the probable causes. Action: Use MAP 0230: Platform error problem resolution.
A01-00x		Description: Error log analysis indicates an error detected by the CPU, but the failure could not be isolated. Action: Use MAP 0230: Platform error problem resolution.
A01-01x		Description: CPU internal error. Action: Use MAP 0230: Platform error problem resolution.
A01-02x		Description: CPU internal cache or cache controller error. Action: Use MAP 0230: Platform error problem resolution.
A01-03x		Description: External cache parity or multi-bit ECC error. Action: Use MAP 0230: Platform error problem resolution.
A01-04x		Description: External cache ECC single-bit error. Action: Use MAP 0230: Platform error problem resolution.
A01-05x		Description: System bus time-out error. Action: Use MAP 0230: Platform error problem resolution.
A01-06x		Description: Time-out error waiting for I/O. Action: Use MAP 0230: Platform error problem resolution.
A01-07x		Description: System bus parity error. Action: Use MAP 0230: Platform error problem resolution.
A01-08x		Description: System bus protocol/transfer error. Action: Use MAP 0230: Platform error problem resolution.
A02-00x		Description: Error log analysis indicates an error detected by the memory controller, but the failure could not be isolated. Action: Use MAP 0230: Platform error problem resolution.
A02-01x		Description: Uncorrectable Memory Error. Action: Use MAP 0230: Platform error problem resolution.
A02-02x		Description: ECC correctable error. Action: Use MAP 0230: Platform error problem resolution.
A02-03x		Description: Correctable error threshold exceeded. Action: Use MAP 0230: Platform error problem resolution.
A02-04x		Description: Memory Control subsystem internal error. Action: Use MAP 0230: Platform error problem resolution.
A02-05x		Description: Memory Address Error (invalid address or access attempt). Action: Use MAP 0230: Platform error problem resolution.
A02-06x		Description: Memory Data error (Bad data going to memory). Action: Use MAP 0230: Platform error problem resolution.
A02-07x		Description: Memory bus/switch internal error. Action: Use MAP 0230: Platform error problem resolution.
A02-08x		Description: Memory time-out error. Action: Use MAP 0230: Platform error problem resolution.
A02-09x		Description: System bus parity error. Action: Use MAP 0230: Platform error problem resolution.
A02-10x		Description: System bus time-out error. Action: Use MAP 0230: Platform error problem resolution.
A02-11x		Description: System bus protocol/transfer error. Action: Use MAP 0230: Platform error problem resolution.
A02-12x		Description: I/O Host Bridge time-out error. Action: Use MAP 0230: Platform error problem resolution.
A02-13x		Description: I/O Host Bridge address/data parity error. Action: Use MAP 0230: Platform error problem resolution.
A02-15x		Description: System support function error. Action: Use MAP 0230: Platform error problem resolution.
A02-16x		Description: System bus internal hardware/switch error. Action: Use MAP 0230: Platform error problem resolution.
A03-00x		Description: Error log analysis indicates an error detected by the I/O device, but the failure could not be isolated. Action: Use MAP 0230: Platform error problem resolution.
A03-01x		Description: I/O Bus Address parity error. Action: Use MAP 0230: Platform error problem resolution.
A03-02x		Description: I/O Bus Data parity error. Action: Use MAP 0230: Platform error problem resolution.
A03-03x		Description: I/O bridge/device time-out, access or other error. Action: Use MAP 0230: Platform error problem resolution.
A03-04x		Description: I/O bridge/device internal error. Action: Use MAP 0230: Platform error problem resolution.
A03-05x		Description: I/O Error on non-PCI bus. Action: Use MAP 0230: Platform error problem resolution.
A03-06x		Description: Mezzanine bus address parity error. Action: Use MAP 0230: Platform error problem resolution.
A03-07x		Description: System bus address parity error. Action: Use MAP 0230: Platform error problem resolution.
A03-08x		Description: Mezzanine bus data parity error. Action: Use MAP 0230: Platform error problem resolution.
A03-09x		Description: System bus data parity error. Action: Use MAP 0230: Platform error problem resolution.
A03-10x		Description: Mezzanine bus time-out, transfer or protocol error. Action: Use MAP 0230: Platform error problem resolution.
A03-11x		Description: System bus time-out error. Action: Use MAP 0230: Platform error problem resolution.
A03-12x		Description: Error on System bus. Action: Use MAP 0230: Platform error problem resolution.
A03-13x		Description: I/O Expansion bus parity error. Action: Use MAP 0230: Platform error problem resolution.
A03-14x		Description: I/O Expansion bus time-out error. Action: Use MAP 0230: Platform error problem resolution.
A03-15x		Description: I/O Expansion bus connection failure. Action: Use MAP 0230: Platform error problem resolution.
A03-16x		Description: I/O Expansion unit not in an operating state. Action: Use MAP 0230: Platform error problem resolution.
A05-00x		Description: Error log analysis indicates an environmental and power warning, but the failure could not be isolated. Action: Use MAP 0230: Platform error problem resolution.
A05-01x		Description: Sensor indicates a fan has failed. Action: Use MAP 0230: Platform error problem resolution.
A05-02x		Description: System shutdown due to a fan failure. Action: Use MAP 0230: Platform error problem resolution.
A05-03x		Description: Sensor indicates a voltage outside normal range. Action: Use Power problem isolation for your system.
A05-04x		Description: System shutdown due to voltage outside normal range. Action: Use Power problem isolation for your system.
A05-05x		Description: Sensor indicates an abnormally high internal temperature. Action: Verify that: The room ambient temperature is within the system operating environment. There is unrestricted air flow around the system. All system covers are closed. There are no fan failures. If none of these problems exist, then proceed with MAP 0230: Platform error problem resolution.
A05-06x		Description: System shutdown due to abnormally high internal temperature. Action: Verify that: The room ambient temperature is within the system operating environment. There is unrestricted air flow around the system. All system covers are closed. There are no fan failures. If none of these problems exist, then proceed with MAP 0230: Platform error problem resolution.
A05-07x		Description: Sensor indicates a power supply has failed. Action: Use MAP 0230: Platform error problem resolution.
A05-08x		Description: System shutdown due to power supply failure. Action: Use MAP 0230: Platform error problem resolution.
A05-09x		Description: Sensor detected a FRU that has failed. Action: Use MAP 0230: Platform error problem resolution.
A05-10x		Description: System shutdown due to FRU that has failed. Action: Use MAP 0230: Platform error problem resolution.
A05-14x		Description: System shutdown due to power fault with an unspecified cause. Action: Use MAP 0230: Platform error problem resolution.
A05-16x		Description: System shutdown due to internal power supply failure. Action: Use MAP 0230: Platform error problem resolution.
A05-19x		Description: System shutdown due to Fan failure. Action: Use MAP 0230: Platform error problem resolution.
A05-21x		Description: System shutdown due to over temperature condition. Action: Verify the following: The room ambient temperature is within the system operating environment. There is unrestricted air flow around the system. All system covers are closed. If all conditions are met, then use MAP 0230: Platform error problem resolution.
A05-22x		Description: System shutdown due to over temperature and fan failure. Action: Use MAP 0230: Platform error problem resolution.
A05-24x		Description: Power fault specifically due to internal battery failure. Action: Use MAP 0230: Platform error problem resolution.
A0D-00x		Description: Error log analysis indicates an error detected by the service processor, but the failure could not be isolated. Action: Use MAP 0230: Platform error problem resolution.
A0D-01x		Note: Ensure that the system IPLROS and service processor are at the latest firmware level before removing any parts from the system. Description: Time-out communication response from service processor. Action: Use MAP 0230: Platform error problem resolution.
A0D-02x		Description: I/O (I2C) general bus error. Note: If you are servicing a 9076/Nxx system, go to the service processor Error Log (SVP). Action: Use MAP 0230: Platform error problem resolution.
A0D-03x		Description: Secondary I/O (I2C) general bus error. Action: Use MAP 0230: Platform error problem resolution.
A0D-04x		Description: Internal service processor memory error. Action: Use MAP 0230: Platform error problem resolution.
A0D-05x		Description: Service processor error accessing special registers. Action: Use MAP 0230: Platform error problem resolution.
A0D-06x		Description: Service processor reports unknown communication error. Action: Use MAP 0230: Platform error problem resolution.
A0D-07x		Description: Internal service processor firmware error or incorrect version. Action: Use MAP 0230: Platform error problem resolution.
A0D-08x		Description: Other internal service processor hardware error. Action: Use MAP 0230: Platform error problem resolution.
A0D-09x		Description: Service processor error accessing vital product data EEPROM. Action: Use MAP 0230: Platform error problem resolution.
A0D-10x		Description: Service processor error accessing operator panel. Action: Use MAP 0230: Platform error problem resolution.
A0D-11x		Description: Service processor error accessing power controller. Action: Use MAP 0230: Platform error problem resolution.
A0D-12x		Description: Service processor error accessing fan sensor. Action: Use MAP 0230: Platform error problem resolution.
A0D-13x		Description: Service processor error accessing thermal sensor. Note: If you are servicing a 9076/Nxx system, go to the service processor Error Log (SVP). Action: Use MAP 0230: Platform error problem resolution.
A0D-14x		Description: Service processor error accessing voltage sensor. Note: If you are servicing a 9076/Nxx system, go to the service processor Error Log (SVP). Action: Use MAP 0230: Platform error problem resolution.
A0D-17x		Description: Service processor error accessing serial port. Action: Use MAP 0230: Platform error problem resolution.
A0D-18x		Description: Service processor detected NVRAM error. Action: Use MAP 0230: Platform error problem resolution.
A0D-19x		Description: Service processor error accessing real time clock/time-of-day clock. Action: Use MAP 0230: Platform error problem resolution.
A0D-20x		Description: Service processor error accessing scan controller/hardware. Action: Use MAP 0230: Platform error problem resolution.
A0D-21x		Description: Service processor detected error with time-of-day clock backup battery. Action: Use MAP 0230: Platform error problem resolution.
A0D-23x		Description: Loss of heart beat from service processor. Action: Use MAP 0230: Platform error problem resolution.
A0D-24x		Description: Service processor detected a surveillance time-out. Action: Use MAP 0230: Platform error problem resolution.
A0D-25x		Description: Power control network general connection failure. Action: Use MAP 0230: Platform error problem resolution.
A0D-26x		Description: Power control network node failure. Action: Use MAP 0230: Platform error problem resolution.
A0D-29x		Description: Service processor error accessing power control network. Action: Use MAP 0230: Platform error problem resolution.
A0D-30x		Description: Non-supported hardware. Action: Use MAP 0230: Platform error problem resolution.
A0D-31x		Description: Error detected while handling an attention/interrupt from the system hardware. Action: Use MAP 0230: Platform error problem resolution.
A0D-33x		Description: Array of Logic Built in Self Test Error. Action: Use MAP 0230: Platform error problem resolution.
A0D-34x		Description: Wire Test Error. Action: Use MAP 0230: Platform error problem resolution.
A0D-35x		Description: Mainstore or Cache IPL Diagnostic Error. Action: Use MAP 0230: Platform error problem resolution.
A0D-36x		Description: Other IPL Diagnostic Error. Action: Use MAP 0230: Platform error problem resolution.
A0D-37x		Description: Clock or PLL Error. Action: Use MAP 0230: Platform error problem resolution.
A0D-38x		Description: Hardware Scan or Initialization Error. Action: Use MAP 0230: Platform error problem resolution.
A0D-39x		Description: Chip ID Verification Error. Action: Use MAP 0230: Platform error problem resolution.
A0D-40x		Description: FRU Presence/Detect Error (Mis-Plugged). Action: Use MAP 0230: Platform error problem resolution.
A10-100		Description: The resource is unavailable due to an error. System is operating in degraded mode. Action: Use MAP 0230: Platform error problem resolution.
A10-200		Description: The resource was marked failed by the platform. The system is operating in degraded mode. Action: Use MAP 0230: Platform error problem resolution.
A10-210		Description: The processor has been deconfigured. The system is operating in degraded mode. Action: Use MAP 0230: Platform error problem resolution.
A11-00x		Description: A non-critical error has been detected. Error log analysis indicates an error detected by the CPU, but the failure could not be isolated. Action: Use MAP 0230: Platform error problem resolution.
A11-01x		Description: A non-critical error has been detected, a CPU internal error. Action: Schedule deferred maintenance. Use MAP 0230: Platform error problem resolution.
A11-02x		Description: A non-critical error has been detected, a CPU internal cache or cache controller error. Action: Schedule deferred maintenance. Use MAP 0230: Platform error problem resolution.
A11-03x		Description: A non-critical error has been detected, an external cache parity or multi-bit ECC error. Action: Schedule deferred maintenance. Use MAP 0230: Platform error problem resolution.
A11-04x		Description: A non-critical error has been detected, an external cache ECC single-bit error. Action: Schedule deferred maintenance. Use MAP 0230: Platform error problem resolution.
A11-05x		Description: A non-critical error has been detected, a system bus time-out error. Action: Schedule deferred maintenance. Use MAP 0230: Platform error problem resolution.
A11-06x		Description: A non-critical error has been detected, a time-out error waiting for an I/O device. Action: Schedule deferred maintenance. Use MAP 0230: Platform error problem resolution.
A11-07x		Description: A non-critical error has been detected, a system bus parity error. Action: Schedule deferred maintenance. Use MAP 0230: Platform error problem resolution.
A11-08x		Description: A non-critical error has been detected, a system bus protocol/transfer error. Action: Schedule deferred maintenance. Use MAP 0230: Platform error problem resolution.
A11-50x		Description: Recoverable errors on resource indicate a trend toward an unrecoverable error. However, the resource could not be deconfigured and is still in use. The system is operating with the potential for an unrecoverable error. Action: If repair is not immediately available, reboot and the resource will be deconfigured. Then operations can continue in a degraded mode. To repair use MAP 0230: Platform error problem resolution.
A11-510		Description: Resource has been deconfigured and is no longer in use due to a trend toward an unrecoverable error. Action: The system is operating in a degraded mode. Schedule deferred maintenance. Use MAP 0230: Platform error problem resolution.
A11-520		Description: Recoverable errors on resource indicate a trend toward an unrecoverable error. However, the resource could not be deconfigured and is still in use. The system is operating with the potential for an unrecoverable error. Action: Try removing the processes from the failing processor and retry the deconfiguration; use the `ha_star -C` command. An alternative is reboot, and the processor will be deconfigured. Then the system can continue in a degraded mode. To repair use MAP 0230: Platform error problem resolution.
A11-530		Description: Recoverable errors on resource indicate a trend toward an unrecoverable error. However, the resource could not be deconfigured and is still in use. The system is operating with the potential for an unrecoverable error. Run-time processor deconfiguration can be enabled to deconfigure the processor. Action: To enable run-time processor deconfiguration, use the `chdev -a cpuguard=enable -l sys0` command. Then to retry the deconfiguration, use the `ha_star -C` command. An alternative is reboot, and the processor will be deconfigured. Then the system can continue in a degraded mode. To repair use MAP 0230: Platform error problem resolution.
A11-540		Description: Recoverable errors on resource indicate a trend toward an unrecoverable error. However, the resource could not be deconfigured and is still in use. The system is operating with the potential for an unrecoverable error. Action: If repair is not immediately available, reboot and the resource will be deconfigured. Then operations can continue in a degraded mode. To repair use MAP 0230: Platform error problem resolution.
A11-550		Description: Recoverable errors on resource indicate a trend toward an unrecoverable error. However, the resource could not be deconfigured and is still in use. The system is operating with the potential for an unrecoverable error. Action: If repair is not immediately available, reboot and the resource will be deconfigured. Then operations can continue in a degraded mode. To repair use MAP 0230: Platform error problem resolution.
A11-560		Description: Recoverable errors on a resource indicate a potential for unrecoverable errors. The resource cannot be deconfigured and is still in use. The problem may be corrected by array bit steering. Action: Use MAP 0235: System array self-repair problem resolution.
A11-570		Description: A processor has been deconfigured due to a trend toward an unrecoverable error. The system is operating in a degraded mode. The problem may be corrected by array bit steering. Action: Use MAP 0235: System array self-repair problem resolution.
A11-580		Description: Recoverable errors on a processor indicate a potential for an unrecoverable error. The resource cannot be deconfigured and is still in use. The problem may be corrected by array bit steering. Action: Use MAP 0235: System array self-repair problem resolution.
A12-00x		Description: A non-critical error has been detected. Error log analysis indicates an error detected by the memory controller, but the failure could not be isolated. Action: Schedule deferred maintenance. Use MAP 0230: Platform error problem resolution.
A12-01x		Description: A non-critical error has been detected, an uncorrectable memory error. Action: Schedule deferred maintenance. Use MAP 0230: Platform error problem resolution.
A12-02x		Description: A non-critical error has been detected, an ECC correctable error. Action: Schedule deferred maintenance. Use MAP 0230: Platform error problem resolution.
A12-03x		Description: A non-critical error has been detected, a correctable error threshold exceeded. Action: Schedule deferred maintenance. Use MAP 0230: Platform error problem resolution.
A12-04x		Description: A non-critical error has been detected, a memory control subsystem internal error. Action: Schedule deferred maintenance. Use MAP 0230: Platform error problem resolution.
A12-05x		Description: A non-critical error has been detected, a memory address error (invalid address or access attempt). Action: Schedule deferred maintenance. Use MAP 0230: Platform error problem resolution.
A12-06x		Description: A non-critical error has been detected, a memory data error (bad data going to memory). Action: Schedule deferred maintenance. Use MAP 0230: Platform error problem resolution.
A12-07x		Description: A non-critical error has been detected, a memory bus/switch internal error. Action: Schedule deferred maintenance. Use MAP 0230: Platform error problem resolution.
A12-08x		Description: A non-critical error has been detected, a memory time-out error. Action: Schedule deferred maintenance. Use MAP 0230: Platform error problem resolution.
A12-09x		Description: A non-critical error has been detected, a system bus parity error. Action: Schedule deferred maintenance. Use MAP 0230: Platform error problem resolution.
A12-10x		Description: A non-critical error has been detected, a system bus time-out error. Action: Schedule deferred maintenance. Use MAP 0230: Platform error problem resolution.
A12-11x		Description: A non-critical error has been detected, a system bus protocol/transfer error. Action: Schedule deferred maintenance. Use MAP 0230: Platform error problem resolution.
A12-12x		Description: A non-critical error has been detected, an I/O host bridge time-out error. Action: Schedule deferred maintenance. Use MAP 0230: Platform error problem resolution.
A12-13x		Description: A non-critical error has been detected, a I/O host bridge address/data parity error. Action: Schedule deferred maintenance. Use MAP 0230: Platform error problem resolution.
A12-15x		Description: A non-critical error has been detected, a system support function error. Action: Schedule deferred maintenance. Use MAP 0230: Platform error problem resolution.
A12-16x		Description: A non-critical error has been detected, a system bus internal hardware/switch error. Action: Schedule deferred maintenance. Use MAP 0230: Platform error problem resolution.
A12-50x		Description: Recoverable errors on resource indicate a trend toward an unrecoverable error. However, the resource could not be deconfigured and is still in use. The system is operating with the potential for an unrecoverable error. Action: If repair is not immediately available, reboot and the resource will be deconfigured. Then operations can continue in a degraded mode. Use MAP 0230: Platform error problem resolution.
A13-00x		Description: A non-critical error has been detected, a error log analysis indicates an error detected by the I/O device, but the failure could not be isolated. Action: Schedule deferred maintenance. Use MAP 0230: Platform error problem resolution.
A13-01x		Description: A non-critical error has been detected, an I/O bus address parity error. Action: Schedule deferred maintenance. Use MAP 0230: Platform error problem resolution.
A13-02x		Description: A non-critical error has been detected, an I/O bus data parity error. Action: Schedule deferred maintenance. Use MAP 0230: Platform error problem resolution.
A13-03x		Description: A non-critical error has been detected, an I/O bus time-out, access or other error. Action: Schedule deferred maintenance. Use MAP 0230: Platform error problem resolution.
A13-04x		Description: A non-critical error has been detected, an I/O bridge/device internal error. Action: Schedule deferred maintenance. Use MAP 0230: Platform error problem resolution.
A13-05x		Description: A non-critical error has been detected, an I/O error on non-PCI bus. Action: Schedule deferred maintenance. Use MAP 0230: Platform error problem resolution.
A13-06x		Description: A non-critical error has been detected, a mezzanine bus address parity error. Action: Schedule deferred maintenance. Use MAP 0230: Platform error problem resolution.
A13-07x		Description: A non-critical error has been detected, a system bus address parity error. Action: Schedule deferred maintenance. Use MAP 0230: Platform error problem resolution.
A13-08x		Description: A non-critical error has been detected, a mezzanine bus data parity error. Action: Schedule deferred maintenance. Use MAP 0230: Platform error problem resolution.
A13-09x		Description: A non-critical error has been detected, a system bus data parity error. Action: Schedule deferred maintenance. Use MAP 0230: Platform error problem resolution.
A13-10x		Description: A non-critical error has been detected, a mezzanine bus time-out error. Action: Schedule deferred maintenance. Use MAP 0230: Platform error problem resolution.
A13-11x		Description: A non-critical error has been detected, a system bus time-out error. Action: Schedule deferred maintenance. Use MAP 0230: Platform error problem resolution.
A13-12x		Description: A non-critical error has been detected, an error on system bus. Action: Schedule deferred maintenance. Use MAP 0230: Platform error problem resolution.
A13-13x		Description: A non-critical error has been detected, an I/O expansion bus parity error. Action: Schedule deferred maintenance. Use MAP 0230: Platform error problem resolution.
A13-14x		Description: A non-critical error has been detected, an I/O expansion bus time-out error. Action: Schedule deferred maintenance. Use MAP 0230: Platform error problem resolution.
A13-15x		Description: A non-critical error has been detected, an I/O expansion bus connection failure. Action: Schedule deferred maintenance. Use MAP 0230: Platform error problem resolution.
A13-16x		Description: A non-critical error has been detected, an I/O expansion unit not in an operating state. Action: Schedule deferred maintenance. Use MAP 0230: Platform error problem resolution.
A13-50x		Description: Recoverable errors on resource indicate a trend toward an unrecoverable error. However, the resource could not be deconfigured and is still in use. The system is operating with the potential for an unrecoverable error. Action: If repair is not immediately available, reboot and the resource will be deconfigured. Then operations can continue in a degraded mode. To repair use MAP 0230: Platform error problem resolution.
A15-01x		Description: Sensor indicates a fan is turning too slowly. Action: Schedule deferred maintenance. Use MAP 0230: Platform error problem resolution.
A15-03x		Description: Sensor indicates a voltage outside normal range. Action: Schedule deferred maintenance. Use MAP 0230: Platform error problem resolution.
A15-05x		Description: Sensor indicates an abnormally high internal temperature. Action: Verify that: The room ambient temperature is within the system operating environment. There is unrestricted air flow around the system. All system covers are closed. There are no fan failures. If none of these problems exist, then proceed with MAP 0230: Platform error problem resolution.
A15-07x		Description: Sensor indicates a power supply has failed. Action: Schedule deferred maintenance. Use MAP 0230: Platform error problem resolution.
A15-09x		Description: Sensor indicates a FRU has failed. Action: Schedule deferred maintenance. Use MAP 0230: Platform error problem resolution.
A15-11x		Description: Sensor detected a redundant fan failure. Action: Schedule deferred maintenance. Use MAP 0230: Platform error problem resolution.
A15-12x		Description: Sensor detected redundant power supply failure. Action: Schedule deferred maintenance. Use MAP 0230: Platform error problem resolution.
A15-13x		Description: Sensor detected a redundant FRU that has failed. Action: Schedule deferred maintenance. Use MAP 0230: Platform error problem resolution.
A15-14x		Description: Power fault due to unspecified cause. Action: Schedule deferred maintenance. Use MAP 0230: Platform error problem resolution.
A15-16x		Description: Internal power supply failure. Action: Schedule deferred maintenance. Use MAP 0230: Platform error problem resolution.
A15-17x		Description: Internal redundant power supply failure. Action: Schedule deferred maintenance. Use MAP 0230: Platform error problem resolution.
A15-19x		Description: Fan failure. Action: Schedule deferred maintenance. Use MAP 0230: Platform error problem resolution.
A15-20x		Description: Non-critical cooling problem, loss of redundant fan. Action: Schedule deferred maintenance. Use MAP 0230: Platform error problem resolution.
A15-21x		Description: Over temperature condition. Action: Verify the following: The room ambient temperature is within the system operating environment. There is unrestricted air flow around the system. All system covers are closed. If all conditions are met, then use MAP 0230: Platform error problem resolution.
A15-22x		Description: Fan failure and Over temperature condition. Action: Schedule deferred maintenance. Use MAP 0230: Platform error problem resolution.
A15-23x		Description: Non-critical power problem, loss of redundant power supply. Action: Schedule deferred maintenance. Use MAP 0230: Platform error problem resolution.
A15-24x		Description: Power Fault specifically due to internal battery failure. Action: Schedule deferred maintenance. Use MAP 0230: Platform error problem resolution.
A15-50x		Description: Recoverable errors on resource indicate a trend toward an unrecoverable error. However, the resource could not be deconfigured and is still in use. The system is operating with the potential for an unrecoverable error. Action: If repair is not immediately available, reboot and the resource will be deconfigured. Then operations can continue in a degraded mode. To repair use MAP 0230: Platform error problem resolution.
A1D-00x		Description: A non-critical error has been detected. Error log analysis indicates an error detected by the service processor, but the failure could not be isolated. Action: Schedule deferred maintenance. Use MAP 0230: Platform error problem resolution.
A1D-01x		Note: Ensure that the system IPLROS and service processor are at the latest firmware level before removing any parts from the system. Description: A non-critical error has been detected. Time Out communication response from service processor. Action: Schedule deferred maintenance. Use MAP 0230: Platform error problem resolution.
A1D-02x		Description: A non-critical error has been detected, an I/O (I2C) general bus error. Action: Schedule deferred maintenance. Use MAP 0230: Platform error problem resolution.
A1D-03x		Description: A non-critical error has been detected, a secondary I/O (I2C) general bus error. Action: Schedule deferred maintenance. Use MAP 0230: Platform error problem resolution.
A1D-04x		Description: A non-critical error has been detected, an internal service processor memory error. Action: Schedule deferred maintenance. Use MAP 0230: Platform error problem resolution.
A1D-05x		Description: A non-critical error has been detected, a service processor error accessing special registers. Action: Schedule deferred maintenance. Use MAP 0230: Platform error problem resolution.
A1D-06x		Description: A non-critical error has been detected, a service processor reports unknown communication error. Action: Schedule deferred maintenance. Use MAP 0230: Platform error problem resolution.
A1D-07x		Description: A non-critical error has been detected. Internal service processor firmware error or incorrect version. Action: Schedule deferred maintenance. Use MAP 0230: Platform error problem resolution.
A1D-08x		Description: A non-critical error has been detected, an other internal service processor hardware error. Action: Schedule deferred maintenance. Use MAP 0230: Platform error problem resolution.
A1D-09x		Description: A non-critical error has been detected, a service processor error accessing vital product data EEPROM. Action: Schedule deferred maintenance. Use MAP 0230: Platform error problem resolution.
A1D-10x		Description: A non-critical error has been detected, a service processor error accessing operator panel. Action: Schedule deferred maintenance. Use MAP 0230: Platform error problem resolution.
A1D-11x		Description: A non-critical error has been detected, a service processor error accessing power controller. Action: Schedule deferred maintenance. Use MAP 0230: Platform error problem resolution.
A1D-12x		Description: A non-critical error has been detected, a service processor error accessing fan sensor. Action: Schedule deferred maintenance. Use MAP 0230: Platform error problem resolution.
A1D-13x		Description: A non-critical error has been detected, a service processor error accessing a thermal sensor. Action: Schedule deferred maintenance. Use MAP 0230: Platform error problem resolution.
A1D-14x		Description: A non-critical error has been detected, a service processor error accessing voltage sensor. Action: Schedule deferred maintenance. Use MAP 0230: Platform error problem resolution.
A1D-17x		Description: A non-critical error has been detected, a service processor error accessing serial port. Action: Schedule deferred maintenance. Use MAP 0230: Platform error problem resolution.
A1D-18x		Description: A non-critical error has been detected, a service processor detected NVRAM error. Action: Schedule deferred maintenance. Use MAP 0230: Platform error problem resolution.
A1D-19x		Description: A non-critical error has been detected, a service processor error accessing real time clock/time-of-day clock. Action: Schedule deferred maintenance. Use MAP 0230: Platform error problem resolution.
A1D-20x		Description: A non-critical error has been detected: Service processor error accessing scan controller/hardware. Action: Schedule deferred maintenance. Use MAP 0230: Platform error problem resolution.
A1D-21x		Description: A non-critical error has been detected, a service processor detected error with time-of-day clock backup battery. Action: Schedule deferred maintenance. Use MAP 0230: Platform error problem resolution.
A1D-23x		Description: A non-critical error has been detected: Loss of heart beat from service processor. Action: Schedule deferred maintenance. Use MAP 0230: Platform error problem resolution.
A1D-24x		Description: A non-critical error has been detected, a service processor detected a surveillance time-out. Action: Schedule deferred maintenance. Use MAP 0230: Platform error problem resolution.
A1D-25x		Description: A non-critical error has been detected, a power control network general connection failure. Action: Schedule deferred maintenance. Use MAP 0230: Platform error problem resolution.
A1D-26x		Description: A non-critical error has been detected, a power control network node failure. Action: Schedule deferred maintenance. Use MAP 0230: Platform error problem resolution.
A1D-29x		Description: A non-critical error has been detected, a service process error accessing power control network. Action: Schedule deferred maintenance. Use MAP 0230: Platform error problem resolution.
A1D-30x		Description: A non-critical error has been detected: Non-supported hardware. Action: Schedule deferred maintenance. Use MAP 0230: Platform error problem resolution.
A1D-31x		Description: A non-critical error has been detected: Error detected while handling an attention/interrupt from the system hardware. Action: Schedule deferred maintenance. Use MAP 0230: Platform error problem resolution.
A1D-33x		Description: A non-critical error has been detected: Array of Logic Built in Self Test Error. Action: Schedule deferred maintenance. Use MAP 0230: Platform error problem resolution.
A1D-34x		Description: A non-critical error has been detected: Wire Test Error. Action: Schedule deferred maintenance. Use MAP 0230: Platform error problem resolution.
A1D-35x		Description: A non-critical error has been detected: Mainstore or Cache IPL Diagnostic Error. Action: Schedule deferred maintenance. Use MAP 0230: Platform error problem resolution.
A1D-36x		Description: A non-critical error has been detected: Other IPL Diagnostic Error. Action: Schedule deferred maintenance. Use MAP 0230: Platform error problem resolution.
A1D-37x		Description: A non-critical error has been detected: Clock or PLL Error. Action: Schedule deferred maintenance. Use MAP 0230: Platform error problem resolution.
A1D-38x		Description: A non-critical error has been detected: Hardware Scan or Initialization Error. Action: Schedule deferred maintenance. Use MAP 0230: Platform error problem resolution.
A1D-39x		Description: A non-critical error has been detected: Chip ID Verification Error. Action: Schedule deferred maintenance. Use MAP 0230: Platform error problem resolution.
A1D-40x		Description: A non-critical error has been detected: Presence/Detect Error (Mis-Plugged). Action: Schedule deferred maintenance. Use MAP 0230: Platform error problem resolution.
A1D-50x		Description: Recoverable errors on resource indicate a trend toward an unrecoverable error. However, the resource could not be deconfigured and is still in use. The system is operating with the potential for an unrecoverable error. Action: If repair is not immediately available, reboot and the resource will be deconfigured. Then operations can continue in a degraded mode. To repair use MAP 0230: Platform error problem resolution.
A22-xxxx	xxxx	Defective Multipath I/O Device. Note: To obtain the FFC, substitute the last 3 or 4 digits after the dash (-) for xxxx (The substituted xxxx is the FFC). Action: Use MAP0210 General problem resolution.
A23-001		Multipath I/O Problem Resolution. Action: Use MAP 0285: Multipath I/O (MPIO) problem resolution.
A24-000	Use part number from diagnostics 227	Spurious interrupts on shared interrupt level have exceeded threshold. Action: Use the part numbers reported by diagnostics and use MAP0210 General problem resolution.
A24-xxx	Use xxx 227	Spurious interrupts have exceeded threshold. Action: Use MAP0210 General problem resolution.
A25-001		Platform error, switch network interface extended error data is available. Action: Refer to the hardware management console. Use the system reference codes in the serviceable event view for this partition.