SRN source code

The SRN source code identifies the program or procedure that produced the SRN.

When using SRNs to identify a problem and its resolution, you might need to refer to the source code of the SRN. SRN source codes include the following:

A: The SRN is from a steady number in the operator panel display.
B: The SRN is from a MAP (problem isolation procedure) callout.
C: The SRN was due to a missing resource at configuration time.
D: The SRN is from a diagnostic test after complete isolation testing.
E: The SRN is from a POST failure.
F: The SRN is from a diagnostic test after partial isolation testing.
G: The SRN is from the Error Log Analysis program.
H: The SRN is from a diagnostic message after an 888 sequence.
J: The SRN is from built-in ROM diagnostics.
K: The SRN is from offline diagnostics.

For more information, refer to the List of system reference codes and firmware codes.