B7001733 B7001733

		Explanation
 Platform LIC failure

		Response
 A Platform Licensed Internal Code error occurred.  The IPL
will not continue.  
Look for and correct errors with SRCs of the form
B1xxxxxx in the Serviceable Event View. 
If there are no serviceable B1xxxxxx errors, or if
correcting the errors did not correct this problem, reset
the server firmware settings.  

Attention: Resetting the server firmware settings results in
the loss of all of the partition data that is stored on the
service processor.  Before continuing with this operation,
make sure that you manually record all settings that you
need to preserve.  To reset the server firmware settings,
your authority level must be Administrator or Authorized
service provider.
On the ASMI Welcome pane, specify your user ID and
password, and click Log In. In the navigation area, expand
System Service Aids.  Then select Factory Configuration. 
Select  Reset server firmware settings and click Continue.
The service processor will reboot after all settings have
been reset.
If that does not resolve the problem, replace the service
processor.

		Problem determination
			No action is required.

		Failing Item

				SVCDOCS