MAP1100 Section-44 SPCN Loop Status
About this task
- Figure 1 shows an example of the details window for the SPCN loop status check.
- Description: Verifies whether the SPCN loop is complete
on both CECs:
- The Details panel will indicate if the SPCN loop is complete on each CEC.
- When an OPEN loop is detected, it will indicate the CEC that has open loop.
- Action: On a failed check, for better problem isolation,
run the cdaPreVerify utility. Refer to MAP1214 Run CdaPreVerify. The cdaPreVerify utility runs through a SPCN loop check and might result in a serviceable event with following SRC:
- SRC for open SPCN loop : BED10470
