MAP1100 Section-46 RIO Loop Status

About this task

  • Figure 1 shows an example of the details window for the RIO Loop Status check (in this example, a good condition is shown).
  • Description: Verifies from each CEC whether the RIO loop is complete:
    • The Details window indicates whether there are open RIO loops.
    • When an open loop is detected, the following message is displayed:
       Detected problem in RIO Loop. Please run CdaPreVerify to isolate the problem in RIO loop.
  • Action: On failed check, run CdaPreVerify to isolate the problem in the RIO loop. CdaPreVerify may open additional serviceable events to isolate the problem. Refer to MAP1214 Run CdaPreVerify.
Figure 1. Window: RIO loop status details
Window:RIO loop status details