(5708xxxx) Reference codes

If the error is reported on the control panel, the unit reference code is characters 5 through 8 of the top 16 character line of function 11. If the error is reported on the console, the unit reference code is the four rightmost characters of the first word.

Find the unit reference code in Table 1. For more on the Failing Item column entries, see Isolation MAPs and symbolic FRU procedures.

Table 1. (5708xxxx) Reference codes
SRC	Description/Action	Failing Item
57083006	System bus error	ANYBRDG IOP
57083100	Interface error Error occurred on SCSI bus 0.
57083101	Interface error Error occurred on SCSI bus 1.
57083400	SCSI resource error
57088008	A permanent cache battery pack failure occurred	CACHBAT
57088009	Impending cache battery pack failure	CACHBAT
57088130	IOA detected recoverable SCSI bus error An error occurred on SCSI bus 0. No action is required. This reference code is logged for information only.
57088131	IOA detected recoverable SCSI bus error An error occurred on SCSI bus 1. No action is required. This reference code is logged for information only.
57088140	IOA detected recoverable SCSI bus error No action is required. This reference code is logged for information only.
57088141	IOA detected recoverable SCSI bus error No action is required. This reference code is logged for information only.
57088145	A recoverable error occurred
57088150	A permanent failure occurred	ANYBRDG
57088151	Licensed Internal Code error	PTFSRCH
57088155 to 57088156	A permanent failure occurred	PTFSRCH
57088157	I/O adapter card error Display the Service Action Log entry for this SRC. If the Failing Item indicates I/O adapter, then replace the I/O adapter. If the Failing Item indicates SVCDOCS, then do NOT replace the I/O adapter. This is a recoverable error. Perform the following for the I/O processor that the I/O adapter is attached to: If the I/O Processor is not operable and disk units are attached, use Hardware Service Manager to re-IPL the IOP. Other resources attached to the IOP may then need to be Varied On. If disk units are not attached, perform the VRYCFG RESET(*YES) command to reset the IOP and Vary On attached resources.	SVCDOCS
57088300	IOA hardware or PCI bus error	ANYBRDG PTFSRCH
57088301	Not valid condition in Licensed Internal Code	PTFSRCH
57088302	Missing Licensed Internal Code Ensure that the code necessary to support this I/O adapter is loaded.	SVCDOCS
57089055	Write cache data is available for attached storage IOA No service action required.
57089071	Link from IOA to auxiliary cache IOA went operational No service action required.
57089072	Link from IOA to auxiliary cache IOA went non-operational No service action required.
57089073	Disconnected, incompatible, or non-operational storage IOA	SVCDOCS
5708FF3D	I/O adapter detected recoverable error	ANYBRDG