(574Fxxxx) Reference codes

If the error is reported on the control panel, the unit reference code is characters 5 - 8 of the top 16 character line of function 11. If the error is reported on the console, the unit reference code is the four rightmost characters of the first word.

Find the unit reference code in Table 1. For more on the Failing Item column entries, see Isolation MAPs and symbolic FRU procedures.

Table 1. (574Fxxxx) Reference codes
SRC	Description/Action	Failing Item
574F3006	System bus error	ANYBRDG IOP
574F3100	Interface error Error occurred on SCSI bus 0.
574F3101	Interface error Error occurred on SCSI bus 1.
574F3400	SCSI resource error
574F8008	A permanent cache battery pack failure occurred	CACHBAT
574F8009	Impending cache battery pack failure	CACHBAT
574F8130	IOA detected recoverable SCSI bus error. An error occurred on SCSI bus 0. No action is required. This reference code is logged for information only.
574F8131	IOA detected recoverable SCSI bus error. An error occurred on SCSI bus 1. No action is required. This reference code is logged for information only.
574F8140	IOA detected recoverable SCSI bus error. No action is required. This reference code is logged for information only.
574F8141	IOA detected recoverable SCSI bus error. No action is required. This reference code is logged for information only.
574F8145	A recoverable error occurred
574F8150	A permanent failure occurred	ANYBRDG
574F8151	Licensed Internal Code error	PTFSRCH
574F8155 to 574F8156	A permanent failure occurred	PTFSRCH
574F8157	I/O adapter card error Display the Service Action Log entry for this SRC. If the Failing Item indicates I/O adapter, then replace the I/O adapter. If the Failing Item indicates SVCDOCS , then do NOT replace the I/O adapter. This is a recoverable error. Perform the following for the I/O processor that the I/O adapter is attached to: If the I/O Processor is not operable and disk units are attached, use Hardware Service Manager to re-IPL the IOP. Other resources attached to the IOP may then need to be Varied On. If disk units are not attached, perform the VRYCFG RESET(*YES) command to reset the IOP and Vary On attached resources.	SVCDOCS
574F8300	IOA hardware or PCI bus error	ANYBRDG PTFSRCH
574F8301	Not valid condition in Licensed Internal Code	PTFSRCH
574F8302	Missing Licensed Internal Code Ensure that the code necessary to support this I/O adapter is loaded.	SVCDOCS
574F9055	Write cache data is available for attached storage IOA. No service action required.
574F9071	Link from IOA to auxiliary cache IOA went operational. No service action required.
574F9072	Link from IOA to auxiliary cache IOA went non-operational. No service action required.
574F9073	Disconnected, incompatible, or non-operational storage IOA	SVCDOCS
574FFF3D	I/O adapter detected recoverable error.	ANYBRDG