DS8000 Service Documentation Version 8.5.7

Base and expansion rack safety inspection

Use the following procedures to perform a safety inspection of the base and expansion racks.

Remove AC power
The storage facility operates with two mainline power cables to each rack.
External machine check
Use this section to perform the external machine check.
Internal machine check
Use this section perform the internal machine check.
Safety label check
Use this topic to check for safety labels.
Section-1 Check safety labels for Model 941, 94E
Section-2 Check safety labels for Model 951, 95E
Section-3 Check safety labels for Model 961, 96E
Ground jumper check
Follow the steps in this section to check the ground jumpers.
Section-1 Ground jumper check for Model 941, 94E
Section-2 Ground jumper check for Model 951, 95E
Section-3 Ground jumper check for Model 961, 96E

Parent topic: Safety inspection